3 Leaf 25-1/4″ x 1-3/4″ Trailer Double Eye Spring for 2000 lb Axles

Description

3 Leaf 25-1/4″ x 1-3/4″ Trailer Double Eye Spring for 2000 lb Axles

Upgrade your trailer’s suspension with our high-quality Double Eye Spring for 2000 lb Axles. Designed for durability and a smooth ride, this 3-leaf spring is perfect for light-duty trailers requiring reliable performance. Whether you’re replacing old springs or building a new trailer, this double eye spring offers excellent shock absorption and reduces wear and tear on your trailer.

Specifications

• Number of Leaves: 3
• Width: 1.75″
• Length: 25.25″ (center to center of the eyes)
• Eye Diameter: 9/16″
• Bushing: Nylon
• Individual Spring Capacity: 1,000 lbs
• Total Axle Capacity: 2,000 lbs
• Part Numbers:
  • Axletek: ML-022-00
  • Alko: 8101
  • TDE: 13099
  • Dexter: 071-022-00
  • UNA: UNA-219
  • MLA: MLA-219

Features

• 3-leaf double eye spring designed for 2,000 lb axles
• Flexes to absorb road shock and provide a smooth ride
• Reduces wear and tear on your trailer
• Ensures level ride on bumpy and uneven surfaces
• Mounts to trailer frame with hangers or a hanger kit (sold separately)

Signs That You Need to Replace Your Leaf Springs

Leaf springs play a crucial role in your trailer’s suspension system. Here are some signs that indicate it’s time to replace your double eye springs for 2000 lb axles:

• Sagging Suspension: If your trailer sits lower than usual or unevenly, it may indicate worn-out springs.
• Visible Damage: Cracks, corrosion, or broken leaves are clear signs that replacement is necessary.
• Noisy Operation: Squeaking or clunking noises during towing can indicate damaged springs.
• Reduced Load Capacity: If your trailer struggles to carry its usual load, the springs may have weakened.
• Uneven Tire Wear: Worn springs can lead to misalignment, causing tires to wear unevenly.

Replacing your old springs with our high-quality double eye springs for 2000 lb axles can restore your trailer’s performance and safety.

How to Install New Leaf Springs on Your Trailer

Installing new double eye springs for 2000 lb axles is a straightforward process. Follow these steps to ensure a safe and proper installation:

1. Prepare Your Trailer: Park on a level surface and secure the trailer with wheel chocks.
2. Raise the Trailer: Use a jack to lift the trailer frame until the weight is off the springs. Support the trailer with jack stands.
3. Remove the Old Springs:
   • Remove the wheels to access the springs.
   • Disconnect the u-bolts that secure the axle to the springs.
   • Remove the bolts from the front and rear spring hangers.
   • Take out the old leaf springs carefully.
4. Inspect Components: Check the spring hangers, bolts, and bushings for wear. Replace any damaged parts.
5. Install the New Springs:
   • Position the new double eye spring for 2000 lb axles into the spring hangers.
   • Insert the bolts through the eyes and secure them with nuts.
   • Ensure the springs are correctly aligned.
6. Attach the Axle:
   • Place the axle on top of the springs (or below, depending on your setup).
   • Secure the axle to the springs using u-bolts and tie plates.
   • Tighten the u-bolts evenly to the manufacturer’s specifications.
7. Reinstall the Wheels: Mount the wheels back onto the hubs and tighten the lug nuts.
8. Lower the Trailer: Carefully remove the jack stands and lower the trailer to the ground.
9. Final Inspection: Check all bolts and nuts to ensure they are tight and secure.

By following these steps, you’ll ensure that your new double eye springs for 2000 lb axles are installed correctly, providing optimal performance and safety.

Maintenance Tips for Your Leaf Springs

Proper maintenance of your double eye springs for 2000 lb axles can extend their lifespan and ensure a smooth towing experience:

• Regular Inspections: Check the springs for signs of wear, corrosion, or damage every six months or before long trips.
• Keep Them Clean: Remove dirt, debris, and road grime from the springs to prevent corrosion.
• Lubricate Moving Parts: Apply a light coat of lubricant to the spring eyes and bushings to reduce friction.
• Avoid Overloading: Do not exceed the axle capacity of 2,000 lbs to prevent premature wear.
• Replace Worn Components: If you notice worn bushings or hardware, replace them promptly to maintain optimal performance.

Why Choose Our Double Eye Spring for 2000 lb Axles?

Our 3-leaf double eye spring offers unmatched quality and reliability for your trailer:

• High-Quality Materials: Constructed from durable steel to withstand the rigors of the road.
• Easy Installation: Designed for straightforward installation with standard hangers or hanger kits.
• Trusted Part Numbers: Cross-compatible with industry part numbers:
  • Alko: 8101
  • TDE: 13099
  • Dexter: 071-022-00
  • UNA: UNA-219
  • MLA: MLA-219
• Enhanced Performance: Improves ride quality by absorbing road shock and ensuring a level ride.

Order Your Double Eye Spring for 2000 lb Axles Today

Don’t let worn-out springs compromise your trailer’s performance. Upgrade to our reliable double eye spring for 2000 lb axles and experience the difference in ride quality and safety. Order now and ensure your trailer is ready for the road ahead.