We Are Open Monday - Friday 9-5 (CST)
Proudly Servicing the 🇺🇸
- 1 (888) HAUL360
- Order Today • Ships Tomorrow
$48.10 $79.99 40% OFF
Downloadable Wiring Diagram
Yes, you can add brakes to your 2000 lb trailer axle!
To get started, you’ll want to ensure you have the proper components. Check out our selection for Trailer Axle Drums here: 2000 lb Hub and Drums.
You’ll also need the correct braking system for your setup. For that, we offer a variety of Trailer Brakes specifically designed for 2000 lb trailers. You can explore these options here: 2000 lb Trailer Brakes.
Together, these components will help ensure that your trailer axle is properly equipped and safe for use. Happy towing!
Answer:
• Electric Brakes: These are common and effective for trailers in this weight range. They provide proportional braking power based on the trailer’s load.
• Hydraulic Brakes: Found on some heavy-duty trailers, they offer consistent braking performance but require a hydraulic brake controller.
• Considerations: The choice depends on your trailer’s usage, compatibility with your towing vehicle, and local regulations. Check your manufacturer’s guidelines to ensure you choose the right type and capacity.
Answer:
• Wiring Basics: Trailer brake wiring usually consists of a ground wire, a positive brake signal wire, and sometimes additional wires (such as for reverse lights).
• Secure Connections: Ensure connections are clean, corrosion-free, and secured with proper connectors (quick disconnects, spade connectors, etc.).
• Fuse Protection: Most systems include a fuse to protect against shorts.
• Reference Diagrams: Always consult the wiring diagram provided by your brake manufacturer, as wiring colors and configurations can differ between models.
• Testing: Once wired, test the trailer brakes with the vehicle stationary before hitting the road. If your brakes aren’t activating properly, recheck the connections and consult the manufacturer’s instructions.
Answer:
• Definition: Burnishing is the process of ‘seating in’ the brake shoes or pads by gradually building up friction material contact.
• Purpose: This helps ensure that the brakes engage smoothly and evenly over the entire surface, leading to improved performance and longer life.
• Process:
• Initial Break-In: Lightly apply the brakes at low speeds in a controlled environment to generate minimal, consistent heat.
• Multiple Cycles: Repeat braking gently several times to smooth out the contact surface.
• Consequences of Skipping Burnishing: Without proper burnishing, you might experience uneven braking, reduced effectiveness, or premature brake wear.
Answer:
• Preparation:
• Verify you have the correct brake system for your trailer’s weight.
• Gather all tools and refer to the installation manual.
• Mounting the Brakes:
• Securely mount the brake assemblies (whether they are drum or disc brakes) to the trailer axle.
• Check that all hardware is tightened to the manufacturer’s specifications.
• Wiring:
• Run the wiring through the designated channels and secure them away from moving parts.
• Connect the wiring according to the wiring diagram.
• Adjustments:
• Adjust the brake shoes or pads for proper contact with the drum or rotor.
• Ensure there’s proper clearance as recommended in the instructions.
• Testing:
• After installation, test the brakes in a safe, controlled environment.
• Make any necessary fine-tuning adjustments for optimal performance.
Answer:
• Double-Check Wiring: Improper connections or a bad ground can lead to non-functioning brakes.
• Review Adjustments: Ensure the brake shoes/pads are adjusted correctly. Uneven contact may cause dragging or poor braking performance.
• Inspect Burnishing: Inadequate burnishing can result in a delay or inconsistency in brake engagement.
• Consult Documentation: Refer back to your manufacturer’s installation and troubleshooting guides for specific diagnostic tips.
• Professional Help: If you continue to have issues, consult a trailer brake specialist or mechanic for an in-depth inspection.
Yes, we do! We take quality and safety very seriously. Unlike some competitors (like Dexter Brakes), if your brake pads ever show signs of cracking, we stand by our product with a lifetime no crack warranty. This means that if you ever notice any cracks in your brake pads, we’ll replace them free of charge. Our commitment is to provide reliable, safe braking performance throughout the life of your trailer.
Answer:
Troubleshooting trailer brake issues can involve a few key steps. Here’s a simple guide to help you diagnose common problems:
1. Check the Wiring and Connections:
• Inspect All Wiring: Look for loose, frayed, or corroded wires. Ensure that connections (including the ground) are secure and clean.
• Verify the Fuses/Relays: Check that your trailer’s fuse and any brake relay are functioning correctly.
• Consult the Wiring Diagram: Refer to your brake manufacturer’s wiring diagram to ensure that each connection is correct.
2. Examine Brake Components and Adjustments:
• Inspect Brake Pads/Shoes: Look for wear, glazing, or uneven wear. Remember that cracked pads can trigger warranty claims if applicable.
• Check Brake Adjustments: Make sure the brake shoes or pads have the correct amount of clearance with the drum or rotor. Too much clearance can lead to delayed braking, while too little can cause dragging.
• Confirm Burnishing Process: If your brakes are new, verify that they were properly burned in. Inadequate burnishing can lead to inconsistent engagement.
3. Test the Brake Controller and Signals:
• Functionality Check: Ensure that the brake controller in your tow vehicle is calibrated and functioning as it should.
• Signal Verification: Use a multimeter to check that the proper voltage is reaching the trailer brakes when activated.
4. Look for Overheating or Binding:
• Overheating Signs: If the brakes feel ‘grabby’ or if you notice a burning smell during operation, the brakes may be overheating.
• Check for Binding: Ensure that the brakes engage and disengage smoothly. Binding or dragging can indicate issues with the adjustment or mechanical components.
5. Review Installation Details:
• Proper Mounting: Confirm that the brake assemblies and hardware are securely installed. Loose mounting can affect performance.
• Clearance and Alignment: Double-check that the hub face, wheel, and brake drum/rotor are properly aligned.
6. Consult Documentation and Support:
• Owner’s Manual: Revisit the installation and troubleshooting sections in your owner’s manual.
• Professional Assistance: If you’ve run through these steps and are still experiencing problems, consider consulting a trailer brake specialist or a professional mechanic.
Experience seamless and reliable braking performance with our 6000 lb 12 x 2 Self-Adjusting Electric Brake Assembly – Left Hand, specifically designed for left-hand applications. Built to meet the rigorous demands of trailer towing, this 6000 lb 12 x 2 Self-Adjusting Electric Brake Assembly – Left Hand ensures safety and peace of mind on every journey. With a capacity ranging from 5,200 lbs up to an impressive 7,000 lbs, it is the perfect fit for various axle ratings. This self-adjusting brake system eliminates the need for periodic manual adjustments, offering optimal performance without the hassle.
The 6000 lb 12 x 2 Self-Adjusting Electric Brake Assembly – Left Hand – Left Hand is a robust solution designed for demanding towing applications.
Here are some key technical specifications:
| Specification | Details |
|---|---|
| Wheel Size Compatibility | Fits 14.5″, 15″, 16″, and 16.5″ wheels. |
| Mounting Flange Bolt Pattern | Configured with a 5-bolt pattern. |
| Axle Rating | Supports axle ratings of 5,200 lbs, 6,000 lbs, and 7,000 lbs. |
| Limited Warranty | Come with a limited 1-year manufacturer warranty and a lifetime no-crack warranty. |
Our 6000 lb 12 x 2 Self-Adjusting Electric Brake Assembly – Left Hand is ideal for most standard hub-and-drum assemblies. It’s compatible with major brands such as Dexter, Lippert (LCI), and AL-KO, making it versatile across various trailer models. Whether you’re towing a recreational vehicle or commercial cargo, this brake system delivers reliable performance.
Designed specifically for left-hand applications, the 12 x 2 Inch Self-Adjusting Electric Brake Assembly is perfect for driver-side setups on trailers. Its robust design ensures that it can handle heavy loads up to 7,000 lbs and provides consistent braking power throughout its lifespan.
Installing our 6000 lb 12 x 2 Self-Adjusting Electric Brake Assembly – Left Hand is straightforward due to its user-friendly design. Unlike hydraulic brakes that require additional components like actuators and hydraulic lines, this assembly only needs an electric brake controller (sold separately). The automotive-grade friction material ensures long-lasting braking torque while minimizing the risk of cracking or crumbling, which can lead to mechanical lockups.
The self-adjusting feature simplifies maintenance tasks. Standard brakes often necessitate periodic manual adjustments to maintain optimal performance. In contrast, this system automatically keeps the brake shoes aligned, providing consistent braking without the need for frequent servicing.
The self-adjusting feature of our brake assembly significantly reduces maintenance requirements. Standard brakes often necessitate periodic manual adjustments to maintain optimal performance. In contrast, this system automatically keeps the brake shoes aligned, providing consistent braking without the need for frequent servicing.
Extensive testing by QAI and CSA ensures that our brake assembly meets stringent safety standards. The brake has been tested under real-world conditions in a complete automotive setup, ensuring reliable stopping distances. Additionally, it complies with SAE-N environmental regulations, making it an environmentally safe product suitable for use throughout the United States and Canada.
For more information on our trailer brakes and axles, visit:
Invest in the safety and reliability of your towing experience with our 12-inch by 2-inch self-adjusting electric brake assembly. Its advanced features, including automotive-grade friction material and e-coated backing plate, ensure a durable and efficient braking system that requires minimal maintenance. Perfect for trailers up to 7,000 lbs, it’s the ideal choice for any towing application.
| Weight | 12 lbs |
|---|---|
| Dimensions | 13 × 13 × 4 in |
You must be logged in to post a review.
| Weight | 12 lbs |
|---|---|
| Dimensions | 13 × 13 × 4 in |
TowParts.com delivers top-quality trailer and RV parts with fast, reliable service and expert support. With fair prices, an easy shopping experience, and accurate information, we guarantee a hassle-free process from order to delivery.
• Customer-Centric Service
• Integrity & Transparency
• Quality Assurance
• Reliable Fulfillment
Reviews
There are no reviews yet.