Description
5-Leaf 26-1/8″ x 2″ Slipper Spring for 7,000 lb Axles
Restore your trailer’s performance with this heavy-duty 5-leaf slipper spring designed for
7,000 lb trailer axles. Built to endure demanding conditions, this slipper spring ensures a smoother ride and reliable support for trailers with heavy-duty axles. Whether you’re replacing old springs or upgrading your suspension, this spring is a dependable choice.
Specifications
- Spring Type: Slipper
- Leaf Count: 5
- Capacity: 7,000 lbs (per spring)
- Eye to Eye Length: 26-1/8″
- Front Divisional Length: 11-3/16″
- Eye to Slipper Hanger Length: 24-7/8″
- Spring Height: 3″
- Eye Diameter: 9/16″
- Width: 2″
- Bushing: Nylon
- Weight: 19.53 lbs
- Part Numbers: AxleTek: ML-032-00, Dexter: 072-032-00, Lippert (LCI): 122113
Features
- 5-leaf slipper spring engineered for 7,000 lb axles.
- Durable steel construction absorbs shocks for a smoother towing experience.
- Reduces wear on trailer components and improves suspension performance.
- Ensures consistent load handling and a level ride on uneven terrain.
- Compatible with standard hanger kits (sold separately).
Signs That You Need to Replace Your Leaf Springs
Leaf springs are critical for your trailer’s safety. Replace them if you notice:
- Cracks or Corrosion: Damage to the spring leaves.
- Sagging Trailer: Uneven suspension or lower ride height.
- Noisy Towing: Squeaking or clunking sounds during use.
- Load Issues: Reduced capacity or instability when hauling.
- Uneven Tire Wear: Caused by misaligned suspension.
How to Install New Leaf Springs on Your Trailer
Installing new slipper springs is straightforward with the right tools:
- Park your trailer on level ground and secure it with wheel chocks.
- Raise the trailer frame with a jack and secure it with jack stands.
- Remove the wheels and unbolt the old springs.
- Inspect hardware for wear; replace hangers, bushings, or bolts if needed.
- Install the new spring by attaching it to the front hanger and aligning the slipper end with the rear hanger.
- Reattach the axle using u-bolts, ensuring alignment with the spring center pin.
- Tighten all bolts and reinstall the wheels.
- Lower the trailer and double-check alignment and hardware security.
Maintenance Tips for Your Leaf Springs
- Regular Inspections: Check for damage every six months.
- Clean Components: Remove dirt and debris to prevent corrosion.
- Lubricate Bushings: Use appropriate grease to reduce noise.
- Avoid Overloading: Stay within the 7,000 lb axle capacity.
- Rust Protection: Apply rust inhibitors to extend lifespan.
Don’t let worn-out springs compromise your trailer’s performance. Upgrade to our reliable 5-leaf slipper spring for 7,000 lb axles today and enjoy enhanced durability, smoother towing, and peace of mind. Order now and experience the difference!
Reviews
There are no reviews yet.